.:Info
Nick: pcton  Info
Age: 33
Location: Kauhava

.:Projects by user

.:Albums

.:



Title: Mame Project
Created: 15.07.2010 22:27
Pics from my mame cabinet project
Last pic of my work in progress.  The marquee part is made from old cd cases and lighed up with a scanners cold cathode. I also have try to add one led kit that smoothly blings three red leds but they cant compete with cathode light. Budjet so far 0 euros...
Last pic of my work ...
My mame cabinet. There will be extra feet but it's quite stable already. I also might make it very bottom heavy with old carpet machine's weights.
My mame cabinet. The...
The machine room of my mame cabinet. I haven't decide how many amps, power cords and  transformers I will use. Everything runs now with two power cords, one 300w atx psu and one diy electronic kit 12V amp.
The machine room of ...
My mame project...
The keyboard will be replaced with box of buttons and other goods. The Screen and speakers will have board around em.
My mame project......
My incomplete mame cabinet from a BOOKCASE!
Please check my plans...
My incomplete mame c...
My plan for mame cabinet from old book shelf and orher scrap.
My plan for mame cab...

Title: USB-Enclosure
Created: 29.06.2007 21:20
2x5.25" USB-IDE enclosure made from old AT-case
The HUB from...

Completed external 2x5.25" P-ATA drive enclosure
* 4-port USB 2.0 HUB
* USB2.0 -> 40pin IDE/42pin IDE/ SATA adapter
* USB2.0 -> 40pin IDE/42pin IDE adapter
* 2x USB extended to the 5.25 bay
* 4x dual color leds (next to those 2 USB ports)
* 250W AT-PSU
The HUB from......
This is the HUB from below of the PSU...


Completed external 2x5.25" P-ATA drive enclosure
* 4-port USB 2.0 HUB
* USB2.0 -> 40pin IDE/42pin IDE/ SATA adapter
* USB2.0 -> 40pin IDE/42pin IDE adapter
* 2x USB extended to the 5.25 bay
* 4x dual color leds (next to those 2 USB ports)
* 250W AT-PSU
This is the HUB from...
Completed external 2x5.25" P-ATA drive enclosure
* 4-port USB 2.0 HUB
* USB2.0 -> 40pin IDE/42pin IDE/ SATA adapter
* USB2.0 -> 40pin IDE/42pin IDE adapter
* 2x USB extended to the 5.25 bay
* 4x dual color leds (next to those 2 USB ports)
* 250W AT-PSU
Completed external 2...

Default album
Got ram?
Got ram?
Sonera's tuning sticker on my Asus eee
Sonera's tuning stic...
BSOD(blue screen of death) with a broken ram shared for gpu = blue matrix screen of death
BSOD(blue screen of ...
Intel Pentium Pro 200Mhz, a server CPU
Intel Pentium Pro 20...
My workshop/server room at the warehouse
My workshop/server r...
Xbox controller ports in little ex-transformer box.
-Two half meters usb-wires do the connecting to pc.
-B-plugs from cables are partially cutted and carved so cables can stand some pulling...
Xbox controller port...
Remember this?
http://www.allthemods.com/userinfo.php?userid=1490&id=1418

This is my new alternative cover for my enclosery. Easy to switch, I love those thumb screws. Currently runnig with 80mm 12V@5V fan with finger grill.
Remember this?...
External 5.25" USB-IDE enclosery with IDE swap bay

Rear double on-off (+5V & +12V )switch paypassed with two relays and single line key switch(that original switch on the bay). So what's the point?
How to swap, BEFORE:
*Turn off the rear switch (hard to reach)
*Turn off the bay (only to release the drive)
*Swap the HD
*Turn on the bay and lock the HD
*Turn on the rear switch(only way to make it detect the HD)
NOW:
*Turn off the bay
*Swap the HD
*Turn on the bay(detecting!)

There are also pins for external led on ide-adapter board so I plug bays power led into those pins.
External 5.25" ...