.:Info
Nick: nano  Info
Age: 27
Location: Turku

.:Projects by user

.:Albums

.:



Title: lian-li
Created: 01.04.2011 17:28
Back to the basics. Function over form.
Nothing special. Just another gpu intake done right. I'm thinking of doing the same mesh+led here as I did with the front intake.
Nothing special. Jus...
I wanted something a little cooler than the original mesh on the lian-li case so I made one with LED lighting. The LED:s also seem to cool the intake air (temps dropped over 5°C!!).
I wanted something a...

Title: cable managment
Created: 20.11.2009 15:44
Read the project
view project for details
view project for det...

Title: Lancase
Created: 05.09.2009 19:29
my attempt at the perfect case for lan parties. Turns out it was far from perfect; not modular enough and weighed a ton
Here it is. Fully assembled and working. The original case is a SilverStone tj08. It took pretty close to one year to build this. Although I didn't work on this every day and for some reason I decided to cover the whole thing with fiberglass. 
Be sure to check out the other pictures before voting:
http://allthemods.com/userinfo.php?userid=1750&id=7186
http://allthemods.com/userinfo.php?userid=1750&id=7185
http://allthemods.com/userinfo.php?userid=1750&id=7184
http://allthemods.com/userinfo.php?userid=1750&id=7183
Here it is. Fully as...
from the rear.
from the rear....
on it's back. Nothing special, it will just be transported like that and the supports should protect the paint...
on it's back. Nothin...
view from the window
view from the window...
wire management.
wire management....
Yay! I'm done with painting. Next picture will be a fully assembled case. Unless Murphys laws kick in...
Yay! I'm done with p...
finally got some brown on the case. Too bad I was trying to paint the whole thing with only 1.5 cans of spray paint so the finish on the paint is now terrible. At least the color is nice (it is way too orange in these pictures).
finally got some bro...
BOOM! birthday update. I'm currently repainting the case due to cold painting temperatures and sloppy prep work. You can see the future base color on the window panel. I will be painting the supports on the backside black tomorrow(again ofc.). I might even be able to pull this together for asm '10!
BOOM! birthday updat...
Finally got the window looking like it should be. I was a bit afraid of making it look like a premod by adding those screws, but I like the way it turned out. I am planning on getting ths screws black somehow. Also I will be doing something similar to the front intake
Finally got the wind...
Here I have fibreglassed the supports for the case (You could say that I've leveld up on fibreglassing). I'm trying to get these and the case ready for a basecoat this weekend.
Here I have fibregla...
And here we see where the supports will be mounted
And here we see wher...
I'm currently working on a support structure for the exterior of the case to protect it from scratches during transportation. This is a piece I used to test my technique on. The final versions will be covered with fibreglass for added strength.
I'm currently workin...
"So, what has nano achieved since his last upload?" nobody might ask. Well I'll tell ya anyways: Been fibreglassing up my case and cutting holes into it. The fan hole on the top was moved about 1cm from it's original position. Coming close to the halfway of this case. todo: fibreglassing, supports, hdd mount, intake fan mount and paint.
ps. comment about my 1337 editing skills and I'll... whatever.
http://www.youtube.com/watch?v=TSYDC_jIoLE
"So, what has n...
Suddenly! out of nowhere a new case appears to allthemopeds. It's a silverstone tj08. The handle, psu mount and hdd cage are not attached yet. I've been doing this case for about a month now.  Still missing some important parts. Also It's missing an intake and an exhaust. I'm trying to make the perfect lan case. Looks kinda crappy for now, but I love it :)
Suddenly! out of now...

Title: stealthcase
Created: 02.01.2009 00:08
My attempt of making a silent case. A smashing success. This one took a half of a year to build...
Found some old photos of the project. I rebuilt the whole front side. The original panel is still under there, although only the mounts are in use.
Found some old photo...
Found some old photos of the project. Originally the rear only had venting holes. Added a bit of extra material so I could fit two 80mm fans
Found some old photo...
before picture, as requested
before picture, as r...
The front of my new case. Please check out the other pictures before you vote.

http://allthemods.com/userinfo.php?userid=1750&id=5088
http://allthemods.com/userinfo.php?userid=1750&id=5087
The front of my new ...
the rear end.
the rear end....
the insides of the computer.
the insides of the c...

Title: yellowcase
Created: 21.08.2007 20:12
randomly modded over a long period of time.
So I "finished" my old case project for asm '08 and will be with it at D5/1. I never made this case votable, but I think that it is to be done now. I hope that I will be posting my new properly planned project here soon.
So I "finished&...
So here is the (re)painted frontpanel. It still misses leds, switches and a blowhole behind the fan.
So here is the (re)p...
So much done but still so much to do... What you can't see from the picture is the noise suppressing layer around the case. What you can see is the paintjob, new fingerguard and the new fans. Now just to find some yellow cathodes.
So much done but sti...

Default album
Under what pillow do I store dremel teeth to get 35€ for new parts? I hear, that you can get a new dremel for 50€...
Under what pillow do...
Modded my razer with an attiny 25v. Added a fire mode selection button. Now I can shoot semi and full auto with any weapon in any game.

crappy proof of concept video: http://www.youtube.com/watch?v=5GP2coSoobY
Modded my razer with...
Not much to say. Before it was white, now it's green. I also sanded the edges around the d pad so it now works properly.
Not much to say. Bef...
I customised my nintendo ds cover. The quality suffered quite much, sinse I messed up once with the black stripes and began to run out of time. I might redo this after winter assembly. Also, if any one knows a good lining tape let me know :)
I customised my nint...
I was thinking of a way to save up table space at lan partys, and came up with an idea to put the keyboard on the foot of the tft. The idea was such a great success, that I started using it every day...
I was thinking of a ...
I got bored at a lanparty and decided to attempt to breed a keyboard and a toy guitar. It took about 2 hours to design and assemble.
I got bored at a lan...