.:Info
Nick: Lcdlo  Info
Age: 39
Location: Jyvaskyla

.:Projects by user

.:Albums

.:



Title: Corsairs new clothes
Created: 18.02.2015 06:07
Re- invented Cotsair Cx500
Corsair cx500
Corsair cx500...
Corsair cx500
Corsair cx500...
Finally got my psu mod finished. It was a corsair cx600 in first place. But, it had a painfull death, for some reason. 
I forgot to add the insulation under it, when i was testing it after changing caps. Of course i did it on the steel desk. :) (how stupid is that?) 

So i re-made it with cx500. Changed caps, added bitfenix spectre fan and bitfenix alchemy cables. Housing is made from acid proof steel.
Finally got my psu m...

Title: Old case projects
Created: 31.01.2012 09:09

New colour for the "toaster machine"
New colour for the &...
Did some changes to my "toaster machine"
Added a wc for gfx and second radiator to the top.

Afterall my gfx-laptop-cooler wasn┬┤t so usefull as i hoped.

Now it works nicely with low noise..
Did some changes to ...
Case is starting to take shape. :) Missing some white parts.. etc
Case is starting to ...
Old project, -cold steel-. Only picture what i founded. :)
Old project, -cold s...
Picture from "spidercase"
Picture from "s...

Title: Handigrafts
Created: 31.01.2012 09:04

Tried making rose from the wood.
Take one and two in the picture.
Tried making rose fr...
New spider for a while, tried to make it angry.. Made from 40mm stainless steelbar using corner grinder, Dremel 3000 and Fortiflex.
New spider for a whi...
Made a cableholder under my desk.
Took about 3 hours from plate to finish.
Made a cableholder u...
Noticed that my chair did't fit whit my new footrest..
So i made a frame for the new one .
Cushion is taken from old drummer seat.
Noticed that my chai...
Did some thingys under my desk.
Feet for the Define R4 for better airflow...

and a footrest for gaming longer periods. :)
Did some thingys und...
New version of the good old "l÷ylykauha".
New version of the g...
Yet another spider thingy. Just one decoration to my step daughters room.
Yet another spider t...
Tray for the wedding cake. Made using acid proof steel sheets, some pieces of pipe and welded together with tig.
Tray for the wedding...
Closer look.
Closer look....
Bucket. Easy to make and works nicely. Let the full bucket lay in the stones and pour some water, when needed. :)
Bucket. Easy to make...
Pair of sausage grilling sticks, eli makkaratikut.
Pair of sausage gril...
Holder for the keys 2/2 Finished
Holder for the keys ...
Holder for the keys. 1/2
Holder for the keys....

Title: Decorations etc..
Created: 12.12.2011 11:56

Something little for my wife.. Sorry again for using camera that sucks. :)
Something little for...
..And finally,  pile of leds and wool balloons in the jars. 

-Merry Christmas- :)
..And finally, pile...
and of course those need to be lit up with leds. Should look nice.. twenty of them in nice jar or something. Everything needs to be tried at least once, thought. :)
and of course those ...
Some airballoons, wool thread and sugar water, drying and finally lacquer..
Some airballoons, wo...
Candleholder to my wife, nightshot.
Candleholder to my w...

Title: random stuff
Created: 10.11.2010 17:55

Parts for the drrremelathe
Parts for the drrrem...
Parts for the belt sander attachment
Parts for the belt s...
Small belt sander attachment for dremel rotaty tool.

https://www.youtube.com/watch?v=WraOy2e4BxY
Small belt sander at...
Engraving in granite. Made with dremel 4000.
Picture is from Heikki Malmberg from Diablo band.
Engraving in granite...
Diy bending brake. Made from scrap metal.
Ugly, but it works. :)
Diy bending brake. M...
Custom new year stuff. Don't do this at home..

http://www.youtube.com/watch?v=cXWNs_EgQHU
Custom new year stuf...
Modified Belt Sander.
Modified Belt Sander...
Diy-tom pads in use.
Diy-tom pads in use....
Diy tom-pads for e-drums. Piezos bought from bebek. Used two piezos in mesh to eliminate the "hot-spot" effect, and it works. T-drum mesh heads are now changed to rolands dual layered ones, single layered heads just doesn't feel good.
Diy tom-pads for e-d...

Title: Bassdrumcase
Created: 10.11.2010 17:55

Finished..
Finished..
Finished...
Finished......
Finished... after 25-30 hours of working. Easy and simple little mod.
Finished... after 25...
Finished..
Finished..
Nearly finished...
Nearly finished......
Testing with the parts inside.
Testing with the par...
Size comparison with shuttle.
Size comparison with...
All necessary metalworks for the backside done. Holders for the fan, psu and the mb-tray. Then some polishing and painting and the case is ready.
All necessary metalw...
Tray closed..
Tray closed.....
Installing components is easier when you can pull out the component "tray".
Installing component...
Inner "frame" will be removable, so it should make assembling very easy. This should house lg-blu-ray drive, zotac mini-itx mobo, e4500 cpu, and  120 gb 2 1/2" hdd. Psu will be shuttles 100w.  "Drumm" is 177mm long and the radius is about 130mm.
Inner "frame&qu...
Mangled a stainless steel sheet, made feets and attached lugs, and here we are...
Mangled a stainless ...

Default album
Door "wreath" stainless steel and a horseshoe heart from a friend.
Door "wreath&qu...
Diy small "woodworkstation". Lathe and belt/edge -sander.

https://www.youtube.com/watch?v=Cw83n0-LGSY
Diy small "wood...
Something from the shampoo bottle.. :)
Something from the s...
Old-school cooler mod. Replaced 40mm fan with 80mm noctua.
Done with Dremel moto-saw.

Oh.. silence. :)
Old-school cooler mo...
Easy & cheap way to add usb sharing -switch inside your case.
Easy & cheap way...
Two pc:s in define R4. Second one is for networking and for my wifes use. Tried it earlier with via epia based system some time ago, but it was too slow. Second try with asrock 350m1 seems to be a little better. KM- switch is that thing on the left. Main rig uses power button, second starts from reset. Added button in the top of the case changes mouse and keyboard for the rig im using. I need to manually select displays input, because kvm-switches with hdmi are just too expensive.
Needs an gfx upgrade for the main rig and some tidying and it should be fine. :) 

Specs: 
I7-4820k 
Gigabyte ga-x79-ud5
16gb 1600mhz g.skill
R9 280 
2 x kinston v300 120gb
Samsung 850pro 128gb
corsair rm 850

Asrock 350m1 with 
8 gb 1333mhz kingston
Ocz 64gb ssd
streacom st-nano 150w

Aten us242 usb-switch
 lg blu ray & "Reconplayer"- fancontroller´╗┐
Two pc:s in define R...
Again some custom new year stuff... :)
Again some custom ne...
Idea behind the Spaceship...
Idea behind the Spac...
Small add for the spaceship project..
Small add for the sp...
Finished Spaceship for the Dremel Micro space experience competition.
Finished Spaceship f...
Reconplayer, fancontroller with optical drive.
Reconplayer, fancont...
Needed to add a gfx for tiny case. Made a cooler using an old laptop-cooler.

Works better than i thought.
Needed to add a gfx ...
Finished
Finished
Finished
Finished
Aluminium feets for the case. Made with lathe.
Aluminium feets for ...
Wanna have some?
Wanna have some?...
Motherboard tray can be pulled out from the bottom.. Case starts to be ready for painting and assembling. :)
Motherboard tray can...
Side door parts painted..
Side door parts pain...
Front door..
Front door.....
Backside of the door.. Not much to see. :) But you can see how the mesh is attached.
Backside of the door...
Polished the fan cover and drilled some holes for attaching the mesh, fan and cover. This part starts to be ready for painting.. Still loads of work to do. :)
Polished the fan cov...
Closer look for the modified fan from the side panel. I wanted to keep those leds working, so i had to be careful and use mostly basic file for shaping.
Closer look for the ...
And placement for it ..
And placement for it...
Mounting frame for the radiator number 2.
Mounting frame for t...
And finished radiator mount in its place.. Case will house two 120mm radiators, here comes one.
And finished radiato...
Placement for radiator number 1 under construction..
Placement for radiat...
Side.. You can see the "tire" whats coming under the "fender"..
Side.. You can see t...
Pictures with better quality... Backside
Pictures with better...
Front curve done. Needs little more sanding and its fine. :)
Front curve done. Ne...
Shaping the front...
Shaping the front......
Day 4, part 2. Psu cover is a leftover from the "spider case" project, it didn't fit the theme, but it will suit this case nicely, thought..
Day 4, part 2. Psu c...
Day 4. Roof and the placement for the psu/psu cover done.. Decided to weld the roof to the frame, less resonating, i think.
Day 4. Roof and the ...
Day two with the project. Case will be a somekind of copy of the "cold steel".. All parts of the frame are and will be attached with welding. Roof, frontpanel and the side doors will be removable. Mb will be mini-itx sized, and yes, again the connectors are in the bottom.
Day two with the pro...