.:Info
Nick: willek  Info
Age: 36
Location: Tampere

.:Projects by user

.:Albums

.:



Default album
How to make room in a 11m2 room? 
Build a loft bed with only 2 feet.
How to make room in ...
Some lipo repair work.

I had two 6-cell lipo batteries for my blaster. First one died completely and it turned out it had 2 dead cells. The other one worked but kept running out of juice way too early. After measuring the cells I discowered it had one cell that didn't hold capacity very well. It ran out while the other ones were still at 80% capacity.

I stripped the batteries, removed the 2 dead cells and combined the remaining best cells to one 6-cell battery. Covered it with black duct tape. :D 

The red bubblewrap contains the remaining good (and not so good, but working) cells which I plan to keep as spare parts.

If you attempt to repair lipos like this, always use tape and cover the contacts you are not soldering, and solder one at a time. I did so and even then sparks flew when the soldering iron slipped few times.
Some lipo repair wor...
Desktop at the moment. 
2x27" panels with tablemounting. One is a Dell 2711, the other one is a nameless naked S-PVA panel from a "trashbin". Need to build a casing for it..
Table is diy.
Computer and amplifier in a diy rack.
Need to clean the wiremess with a spiralcord or similar.
Also should build a better looking bed.
Desktop at the momen...
I designed a small foldable sofa table.. Don't know if I'll ever get around building it though.
I designed a small f...
I bought a LiPo battery for my Blaster, and of course a charger for it. This is the first time using the charger. Not quite what I had in mind..
I bought a LiPo batt...
In this picture, taken by a modder; a modded object by another modder and a modder. Seems it should be here.
In this picture, tak...
Desk shot
Desk shot
some polyurethane foam.
some polyurethane fo...
Guess what this is?
Guess what this is?...
Check the project!

http://allthemods.com/project.php?id=377
Check the project!...
See Project CarCam rev2.
Here with longer legs. The shorter ones are attached for easy carrying. 
I drilled some holes on the legs. Besides looking cooler, they make it more light.
See Project CarCam r...
See the project for details.
See the project for ...
See the Projet CarCam
See the Projet CarCa...
I built a Glass Cabinet for glasses and booze :)
I built a Glass Cabi...
20" TFT transformed.

Aluminum for new frame and component housing, fake leather for exterior cover.

The stand is from my 24" Dell which now uses table mount stand.
20" TFT transfo...
A little quickmod for my trackball. Before and after
A little quickmod fo...
Inside. Mobo with integrated display adapter, and sound with optical output etc. Slim dvd-drive, and a regular HDD. All powered by picopsu.
Single crossflow fan for ventilation. air intake is in the bottom, and exhaust  in the back left
Inside. Mobo with in...
New HTPC plan. The case is hifi-wide (~43cm), and 6,5cm thick, excluding feet
New HTPC plan. The c...
Diy Gpu cooler, see project for details
Diy Gpu cooler, see ...
See project for details.
See project for deta...
See project for details
See project for deta...
Wooden Spire. http://www.metku.net/index.html?path=mods/woodenspire/index_eng
Wooden Spire. http:/...
pikamodaus
pikamodaus
Two mouse mod specimens. Original on the left.
Two mouse mod specim...