.:Info
Nick: Evenge  Info
Age: 27
Location: Vaasa - Porvoo

.:Albums

.:
User info:
Full name:
Homepage: http://
Age: 27
Location: Finland, Vaasa - Porvoo
Bio:
Uni Student, Casemod enthusiast.



Title: Second project
Created: 16.08.2012 23:10

New IO plate made out of 1mm aluminum. The result was better than I expected! :)
New IO plate made ou...
It has been a while since I last posted here anything. Here I'm test fitting parts and trying to figure out how I will run the wires and water cooling tubes. Let us hope I can get this project done in near future.
It has been a while ...
New I/O plate for GTX 570, first try was quite horrible, but this one is pretty ok. HDMI and DVI port holes could be bit better I think.
New I/O plate for GT...
Motherboard tray. Still some work to do... :)
Motherboard tray. St...
Top ventilation opening.
Top ventilation open...
Some progress. :)
Some progress. :)...
New stuff for late summer. As you can tell case n made by willek has been very huge inspiration for this case. Eversince I first saw that case I have wanted someting like it on my desk too but cooling was troublesome until I decided it's time for me to sink my head into water... :D  There's also some other small things I want to try so time will show what this will become.

Hopefully master himself approves :)

Oh, and fans are temporary. And don't mind the masking tape. :)
New stuff for late s...

Title: First case project
Created: 26.06.2011 14:33
Project log: http://forums.bit-tech.net/showthread.php?t=211671
Didn't have time to take proper pictures but hopefully this will do untill I can borrow proper camera. Only thing to add is the dust filters on the front. And of course redo cable management. Poor cable management is actually the reason why I wont post inside pictures yet :D

But for those who are interested, case hides following setup:

Intel i5 2500K
Asus Maximus Gene-Z
EVGA GTX570 Superclocked
Corsair low profile Dominator memory, 8GB
Corsair TX850 V2 psu (not modular, cable management is.... interesting :D)
Samsung 1tb HDD
Didn't have time to ...
Front mesh painted. Wasn't sure if matte black color would look good, but in my opinion it looks great! :)
Front mesh painted. ...
Some wet sanding. Grits I went through were 120, 240, 360 and finally 600. My goal was to get brushed like finish for exterior, and I'm really happy with the result. 

And this was only good picture I managed to take.
Some wet sanding. Gr...
Case feet attached. Need to buy some soft material or alike to protect my table from scratches.
Case feet attached. ...
Case feet...
Case feet......
Front panel mounted! Mesh will be painted with some dark color. And screws will be changed to proper allen screws.

Still left to do:
-Sand of all the scratches
-Redo mounting holes for Motherboard
-Find some case foots, or make them.
-Cut air intake for PSU
-Order some dust filters
-Do the rest I just forgot...


-And order the rest of my new rig :D
Front panel mounted!...
Insides, HDD is for size comparison.
Insides, HDD is for ...
Made some spacers out of alu pipe, since I wanted to rise the front panel from the case a bit...
Made some spacers ou...
Front fan mount.
Front fan mount....
Back of the case finished! Well, sort of. I made many mistakes while filling holes to correct size, but nevertheless I'm still happy with the end result. 

And the psu hole isn't perfect, I'm thinking of redoing it if time allows it.
Back of the case fin...
Current state. Top, bottom and back plates are attached with tape in this picture to make sure my measurements are correct
Current state. Top, ...
Plan for my first case project... 
And yes, optical drive is missing on purpose
Plan for my first ca...