.:Info
Nick: Yoshi  Info
Age: 27
Location: Kuopio

.:Projects by user
  • Nokia Handsfree Mod
  • Baby S-ATA Mod
  • Club3D 6600GT Coolermod

    • .:Albums
    View all albums

  • Default
  • 6600GT Coolermod
  • Baby S-ATA Mod
  • Honda Monkey
  • Myyty Kone #3
  • Myyty Kone #1
  • Myyty Kone #2
  • Myyty Kone #4
  • Nokia CS-17
  • Random Säätöä
  • Salkkumikro
  • Suzuki PV50 (1985)
  • UPS Watercooling

    • .:


    Title: Random Säätöä
    Created: 22.11.2006 15:18

    Slightly tinkered with my Fujitsu P5730 workstation today. Bought a Radeon HD 6850 with Accelero Twin Turbo II cooler for 50€. Since there was no way of fitting the huge GPU cooler next to the large CPU heatsink, I decided to toss the original fans and just zip-tie a 120mm one on instead. I also had to cut a bit from the fins, since they were making contact with the screws of CPU heatsink. The stock 300W power supply also didn't have a PCI-E 6pin connector, so I had to mod my way around that. I took a spare PCI-E wire of unknown modular power supply, cut it apart and soldered the three yellows and blacks together. After that I ripped apart one of the S-ATA power connectors, soldered my wires there to the 12v line and reassembled the connector. 300W PSU might sound too small for this kind of setup, but the load test confirmed my calculations: It's close, but it's still sufficient since the computer won't crash even under full load. The temperatures on Furmark & Orthos load were around 50'c for CPU and 78'c for GPU. The noise level is almost inaudible and in this case the loudest sound from the computer is the slight humm of HDD spinning. Intel E7500 (Max TDP 65W) HD 6850 1GB (Max TDP around 140W)
    Slightly tinkered wi...    		 DIY-projector in use. Demolux overhead projector 17" Samsung LCD-panel with anti-glare coating removed Some cardboard and tape for the cover. Turned out extremely nice. It's big and ugly, but makes a good ~100" picture. Total cost for the sound and video setup ~50eur, so I'm pretty darn satisfied with the outcome. Next step is to make thicker curtains to block the light from outside.
    DIY-projector in use...    		 Something tells me I might have overdone it again. I5-2500K GA-Z68X-UD3H-B3 Asus 8800GTX 16GB Corsair Vengeance 1600MHz 64GB Buffalo SSD 3x 1TB Samsung 1x 500GB Seagate Corsair TX650 Fractal Design Define R3 Win7 + OSX Lion 24" + 2x 22"
    Something tells me I...    		 One unfortunate 8800 GTS G80 decided not to work with me anymore, so it has now a new job as a keychain. Used heat gun to remove the chip from PCB and screws to hold it with the frame. The fitting is so tight that I couldn't remove the chip with my bare hands even if I wanted to. Turned out quite nicely in my opinion.
    One unfortunate 8800...
    I picked up an external hdd it's power supply from recycling bin in hope of getting a working enclosure for one of my drives. When I first started to test it out, I noticed a whizzing sound coming inside the power supply and the HDD didn't spin up properly. After short moment with multimeter it turned out that the power supply was not giving out the right voltages. I cracked the casing open and noticed three popped capacitors. I replaced one with new, but the two others were too bulky to fit inside the housing. So here is the solution. After testing it again, it turned out that the HDD itself was working. Now i have 400GB external HDD.
    I picked up an exter...    		 This is where i started. This picture was taken just after cutting the hole to motherboard tray. With the hole, i can change almost any CPU cooler without removing the whole motherboard.
    This is where i star...    		 Another computer assembled ! Q8200 + Scythe Mugen 2 Asus P5Q 2x 512m HP 667mhz (only temporary until Corsairs from Akame arrive) Zotac GTX280 3x 1Tb Caviar Green Antec P190 http://f.imagehost.org/0773/PICT0039.jpg High resolution image + Hole to motherboard tray for easy remove of CPU cooler + Three hours of game called "hide the wires"
    Another computer ass...    		 Updated some hardware E7300 P5Q Pro Scythe Mugen 2 4gb Corsair Domnator 1066mhz ATI 2900XT 1gb Corsair HX620 Fan actually hits the memory stic so not much room left there :/ Tested out the 3850X2 with this rig and got an astonishing numbers: http://www.aijaa.com/img/b/00274/3628866.jpg +16 000marks, me happy ! http://www.aijaa.com/img/b/00177/3642808.jpg <-- Run with GTX280
    Updated some hardwar...
    Weirdo GPU: Asus 3850X2 1GB Kinda funky card, both fans run at full whopping 8000rpm all the time. Also they are not in right positions over the dual coolers. Lucky me, this one has no warranty so i can do some improvements without worrying about warranty. If this card blows, it's game over :S http://www.aijaa.com/img/b/00882/3497142.jpg http://www.aijaa.com/img/b/00369/3497143.jpg http://www.aijaa.com/img/b/00950/3497145.jpg http://www.aijaa.com/img/b/00325/3497176.jpg 3dMark06 runs with E6600 (a hell of a bottleneck) http://www.aijaa.com/img/b/00749/3527599.jpg <-- 2400mhz http://www.aijaa.com/img/b/00229/3527600.jpg <-- 3000mhz http://www.aijaa.com/img/b/00392/3529839.jpg <-- 3200mhz
    Weirdo GPU:...    		 External e-Sata enclosure completed Turned out really well in my opinion. Reading speed: average of 90mb/s
    External e-Sata encl...    		 Exterior almost completed :)
    Exterior almost comp...    		 Exterior almost completed :)
    Exterior almost comp...
    HP SureStore DAT40 external drive to 1000gb E-SATA enclosure with quiet 80mm fan Cooling = sufficent Capacity = enough Noise = quiet Speed = fast What more could you want from your external HDD ? Still to come: larger hole to front panel, mesh to cover it and whole thing painted black.
    HP SureStore DAT40 e...    		 HP SureStore DAT40 external drive to 1000gb E-SATA enclosure with quiet 80mm fan Cooling = sufficent Capacity = enough Noise = quiet Speed = fast What more could you want from your external HDD ? Still to come: larger hole to front panel, mesh to cover it and whole thing painted black.
    HP SureStore DAT40 e...    		 HP SureStore DAT40 external drive to 1000gb E-SATA enclosure with quiet 80mm fan Cooling = sufficent Capacity = enough Noise = quiet Speed = fast What more could you want from your external HDD ? Still to come: larger hole to front panel, mesh to cover it and whole thing painted black.
    HP SureStore DAT40 e...    		 So, which one should i use today ? A31p #1: 1.7ghz P4-m, 1024m DDR, ATI FireGL 7800, 15" 1600x1200, 120gb Seagate A31p #2: 1.9ghz P4-m, 512m DDR, Mobility Radeon 7500, 15" 1024x768, no HDD A31 #1 : 1.6ghz P4-m, 512m DDR, Mobility Radeon 7500, 15" 1440x1040, 60gb HDD A31 #2 : 1.7ghz P4-m, 512m DDR, Mobility Radeon 7500, 15" 1440x1040, 40gb HDD T30 : 1.8ghz P4-m, 512m DDR, Mobility Radeon 7500, 15" 1024x768, 12gb HDD Acer 6292 : Core2Duo T7100, 2gb DDR2, Intel GMA X3100, 12" 1280x800, 160gb HDD
    So, which one should...
    Harvestman photographed on carpet Picture taken with Minolta Dimage X60 pocket camera (took many, many shots to get focus right) HI-RES: http://www.aijaa.com/img/b/00993/2892238.jpg
    Harvestman photograp...    		 Co-worker's CPU ran with Asus P5Q E8400 at 4230mhz (1.4V) with Noctua NH-U12P Full load 68'c with low noise adapter (lowers fan speed)
    Co-worker's CPU ran ...    		 Asus Maximus Formula SE Intel Core2Duo E6600 Scythe Orochi This is something B.I.G
    Asus Maximus Formula...    		 Yet another one for sale :) E6600 2gb Corsair XMS2 Asus P5WDG2 WS Pro Asus 8800GTS 640m BeQuiet 500W A+ Dark Trooper DVD+RW No HDD yet
    Yet another one for ...
    EVGA e-Geforce 7950GX2 SuperClocked This goes to Rogue :)
    EVGA e-Geforce 7950G...    		 NZXT Rogue E6320 2gb DDR2-800mhz Intel DG31PR MATX Integroitu näyttis toistaiseksi 80gb 2.5" S-ATA 520W Trust
    NZXT Rogue    		 Brothers ride with some hifi i have arranged to him :) JVC KD-AVX33 DVD/MP3/USB + 30gb HDD Carmedien 7" display 2x JBL POWER P1222 12" 400w rms / 1600w peak Infinity Kappa Perfect JBL GTO amplifier for subs Infinity Reference amp for Kappas Hama Cross-overs 2 Farad Condensator 62Ah extra battery for all the stuff
    Brothers ride with s...    		 Brothers ride with some hifi i have arranged to him :) JVC KD-AVX33 DVD/MP3/USB + 30gb HDD Carmedien 7" display 2x JBL POWER P1222 12" 400w rms / 1600w peak Infinity Kappa Perfect JBL GTO amplifier for subs Infinity Reference amp for Kappas Hama Cross-overs 2 Farad Condensator 62Ah extra battery for all the stuff
    Brothers ride with s...
    Brothers ride with some hifi i have arranged to him :) JVC KD-AVX33 DVD/MP3/USB + 30gb HDD Carmedien 7" display 2x JBL POWER P1222 12" 400w rms / 1600w peak Infinity Kappa Perfect JBL GTO amplifier for subs Infinity Reference amp for Kappas Hama Cross-overs 2 Farad Condensator 62Ah extra battery for all the stuff
    Brothers ride with s...    		 Merry christmas to everyone :)
    Merry christmas to e...    		 Merry christmas to everyone :)
    Merry christmas to e...    		 Legostick 2.0gb is finished :) Kingston 2gb USB flash memory fitted inside Lego brick :)
    Legostick 2.0gb is f...
    7900GTX PCI-E 1000MB aka. 7900GX2 tällanen pikkunen näytönohjain :) verrokkina Palit 7600GT PCI-E
    7900GTX PCI-E 1000MB...    		 Sadepäivän tuotos: tonnikala-ananas-salami ATM.com pizza :) btw... älkää ottako liian vakavasti ;)
    Sadepäivän tuotos: t...